Tabletop Bursting Strength Apparatus , 800psi Burst Testing Equipment
Order Information
RF306BPlus Hydraulic Autoburst (Floor Type)
RF306B /1 Diaphragms (pack of 10pcs)
RF306B /2 Bell and clamping ring set: Diameter: 30mm
RF306B /3 Bell and clamping ring set: Diameter: 30.5mm
RF306B /4 Bell and clamping ring set: Diameter: 31.5mm
RF306B /5 Bell and clamping ring set: Diameter: 35.7mm
RF306B /6 Bell and clamping ring set: Diameter: 79.8mm
RF306B /7 Bell and clamping ring set: Diameter: 112.8mm
RF306B /8 Bell and clamping ring set: Diameter: 31mm
Applications
Testing the knitted, woven and non-woven fabric, paper and
cardboard.
Product Instruction
To determine the bursting strength and distension of woven, knitted
and non-woven fabrics, paper and carton boards by application of
hydraulic pressure under a rubber diaphragm, thus to transfer the
pressure to the test specimen.
- Four testing modes: Beside the two traditional testing modes
(Automatic Bursting Mode and Fixed Flow Rate Bursting Mode),
additional two innovative testing modes were added to the
RF306BPlus, they are the Target Distension Bursting Mode and the
Target Pressure Cyclic Mode. The four test methods can fulfill the
requirements of production quality inspection and product
development.
- Non-contact Laser Displacement Sensor measures the height of the
diaphragm to max. 70mm. It is more accurate than traditional LVDT
sensor. Sensor rod will not contact with diaphragm during testing.
It ensures the longer lifetime of the diaphragms.
- Testing pressure max. 6000kPa, can meet the testing needs of
various specimens.
- Six types of testing kits (testing bells and clamping plates),
meet the different testing requirements.
- Auto Recognition of the testing bells and clamping plates
preventing mis-assembly.
- Transparent protection shelf and LED illumination makes it easy
observe the testing process.
- Touchscreen control, easy operation. The test can be performed
without using PC software.
- Touchscreen controller can save up to 8 batches of testing data.
- PC software can collect testing data and print testing report.
- The saved data can be transferred to the computer easily.
Four test modes are included:
a) Automatic Bursting Mode: Specimen bursting is controlled to be
within 20±5 seconds.
b) Fixed Flow Rate Bursting Mode: Flow rate can be set to meet
different test methods.
c) Target Distension Bursting Mode: Specimen can be inflated to a
fixed height and hold for a desired time to determine the specimen
strength.
d) Target Pressure Cyclic Mode: Specimen can be inflated (UP) and
deflated (DOWN) by some cycles, inflation and deflation flow rate
can be controlled and UP hold time and Down hold time can be set as
desired to determine the extension and bursting of the specimens.
Product Specifications:
- The Maximum pressure capacity: 6000kPa (800PSI)；
- Max. Distension: 70mm；
- Test Bells: Diameter: 30mm,Diameter: 30.5mm,Diameter:
31.5mm,Diameter: 35.7mm,Diameter: 79.8mm, Diameter: 112.8mm；
Standards
| ASTM D3786-06 | | BS 3424-6-B | | ISO 13938-1 |
| ISO 3303-B | | ERT 80-4.02 | | GB/T 7742.1 |
| | | | |
